The non intrusive system application is now preferred in the open channel flow measurements field. For this reason the SGM-LEKTRA developed the FLOWMETER unity to best meet the application requests. The FLOWMETER unit offers, together with its compact size, a easy start up. FLOWMETER is an ultrasonic flow transmitter, temperature-compensated and suitable for connection with MODBUS RTU acquisition systems. FLOWMETER in addition to an analog output includes two freely addressable relay for flow threshold or for totalizer pulse output.
· Solution with high price/performance ratio
· Suitable for each channel/Weir also non-standard
· Flow rate and flow totalizer measure
· IP67 execution; IP68 sensor
· MODBUS RTU com. protocol
· Output: 1 4÷20mA analog output
2 relays output
· Power supply 24Vdc
The non intrusive system application is now preferred in the open channel flow measurements field. For this reason the SGM-LEKTRA developed the FLOWMETER unity to best meet the application requests. The FLOWMETER unit offers, together with its compact size, a easy start up. FLOWMETER is an ultrasonic flow transmitter, temperature-compensated and suitable for connection with MODBUS RTU acquisition systems. FLOWMETER in addition to an analog output includes two freely addressable relay for flow threshold or for totalizer pulse output.
· Solution with high price/performance ratio
· Suitable for each channel/Weir also non-standard
· Flow rate and flow totalizer measure
· IP67 execution; IP68 sensor
· MODBUS RTU com. protocol
· Output: 1 4÷20mA analog output
2 relays output
· Power supply 24Vdc
Housing material |
PC or Al / PP wetted part |
Mechanical installation |
2”GAS M (PP flange DN50 or DN 80 opt.) |
Protection degree |
IP67 / IP68 (sensor) |
Electrical connection |
Internal push connectors |
Working temperature |
-30 ÷ +70°C; +80°C non-continuous |
Pressure |
from 0,5 to 1,5 bar (absolute) |
Power supply |
24Vdc |
Power consumption |
1,5W |
Analog output |
4÷20mA, max 750ohm |
Relays output |
n°2 3A 230Vac (n.o.) |
Digital communication |
MODBUS RTU |
Max measure range |
max 0.25÷5m [In case of non perfectly reflecting surfaces, the maximu distance value will be reduced] |
Blind distance |
0,25m |
Temperature compensation |
digital from -30 to 80°C |
Accuracy |
±0,5% (of the measured distance) not better than ±3mm |
Resolution |
1mm |
Calibration |
4 buttons or by MODBUS RTU |
Warm-up |
5 minutes typical |
LCD Display |
Plug-in display/keyboard 4 buttons matrix LCD |
VL601 |
Display/keypad module (VL601SGM code) for rapid and/or advanced programming of all the METER transmitters |
![]() |
MUX |
Multiplexer adatti alla gestione e controllo da 1 a 8 sonde termometriche digitali mono o multipunto, max. 12, tipo TT Connessione elettrica al multiplexer delle sonde termometriche digitali mono o multipunto tipo TT sempre tramite cavo schermato a 3 conduttori ,configurazione multiplexer tramite 3 tasti a bordo. Visualizzazione su display a bordo multiplexer della configurazione e delle singole temperature rilevate. Connessione elettrica tra multiplexer e unità di visualizzazione e controllo tramite cavo bipolare schermato, tipo AWG22, per comunicazione dati digitali in rete seriale RS485 Fino a max. 63 multiplexer collegabili in rete seriale Multiplexer perfettamente compatibile con i sistemi di rilevamento, controllo e visualizzazione temperature SGM LEKTRA già in opera tipo: MUXA/B/C/D; AGRITHERM10; AGRITHERM20; AGRITHERM40 |
![]() |
MOUNTING SYSTEM FOR ULTRASONICS |
Wide range of accessories for units VLW90M, METER, FLOWMETER ,SGM-101F mounting and their matched sensors. The mounting system is modular and is made entirely of 304. |
![]() |