Capacitive level control that uses an advanced technology, equipped with a sensor in heat sealed PP. This allows its use in a wide applications range for the level control in granulates or powders such as: cement, flour, feed for animals, etc. CLS5 has an maximum tensile strength high value (max 3000 N) and is easily configurable via VL601 module
· Level measurement with medium contact
· For granulates and powders measurement
· PEHD rope
· PP sensor element
· IP67 mechanical protection
· Maximum length 6m
Capacitive level control that uses an advanced technology, equipped with a sensor in heat sealed PP. This allows its use in a wide applications range for the level control in granulates or powders such as: cement, flour, feed for animals, etc. CLS5 has an maximum tensile strength high value (max 3000 N) and is easily configurable via VL601 module
· Level measurement with medium contact
· For granulates and powders measurement
· PEHD rope
· PP sensor element
· IP67 mechanical protection
· Maximum length 6m
Housing material |
PC |
Process connection material |
galvanized steel |
Rope material |
PEHD (high density PE) |
Sensor material |
PP |
Mechanical installation |
1”½GAS M (opt.PP DN80 flange) |
Protection degree |
IP67 |
Tensile strength |
max 3000N (<40°C); max. 2800N (80°C) |
Pressure |
-1÷+6bar |
Working temperature |
-30 ÷ +70°C; +80°C non-continuous |
Power supply |
universal voltage (20÷36Vdc; 20÷255Vac 50/60Hz) |
Max consumption |
130mA |
Cable glands |
n.2 M20x1.5 |
Electrical connection |
Spring-cage |
Relay output |
3A 230Vac |
Intervention mode |
min. or max. |
Delay time |
0÷30s (programmable) |
Setting |
via VL601 removable module |
Empty calibration |
automatic acquisition, via VL601 removable module |
Warm-up |
1 minute typical |
Data View |
dot matrix LCD display on VL601 removable module
yellow LED: power on
red LED: relay status (switched on with energized relay)
|
VL601 |
Display/keypad module (VL601SGM code) for rapid and/or advanced programming of all the METER transmitters |
|