CLS5
发布时间: 2017-11-28 11:52
Capacitive level control that uses an advanced technology, equipped with a sensor in heat sealed PP. This allows its use in a wide applications range for the level control in granulates or powders such as: cement, flour, feed for animals, etc. CLS5 has an maximum tensile strength high value (max 3000 N) and is easily configurable via VL601 module
· Level measurement with medium contact
· For granulates and powders measurement
· PEHD rope
· PP sensor element
· IP67 mechanical protection
· Maximum length 6m
Housing material
PC
Process connection material
galvanized steel
Rope material
PEHD (high density PE)
Sensor material
PP
Mechanical installation
1”½GAS M (opt.PP DN80 flange)
Protection degree
IP67
Tensile strength
max 3000N (<40°C); max. 2800N (80°C)
Pressure
-1÷+6bar
Working temperature
-30 ÷ +70°C; +80°C non-continuous
Power supply
universal voltage (20÷36Vdc; 20÷255Vac 50/60Hz)
Max consumption
130mA
Cable glands
n.2 M20x1.5
Electrical connection
Spring-cage
Relay output
3A 230Vac
Intervention mode
min. or max.
Delay time
0÷30s (programmable)
Setting
via VL601 removable module
Empty calibration
automatic acquisition, via VL601 removable module
Warm-up
1 minute typical
Data View
dot matrix LCD display on VL601 removable module
yellow LED: power on
red LED: relay status (switched on with energized relay)
VL601
Display/keypad module (VL601SGM code) for rapid and/or advanced programming of all the METER transmitters
Opuscolo Brochure Opuscolo versione ATEX
